How to improve the marking speed of fiber laser marking machine
The purpose of fiber laser marking machine is to bring higher production efficiency to enterprises and create higher value, so how to improve the marking speed of fiber laser marking machine?
1. The main factors affecting the fiber laser marking machine are divided into two aspects: internal factors and workpieces.
The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power, reasonable optical shaping and auxiliary gas and material during processing. The internal factors are mainly paid attention to when choosing the model in the early stage, and you should follow the advice of the laser engineer to purchase. Another factor that the customer needs to pay attention to when processing is mainly the marking density, marking area, marking depth and laser spot size.
2. Marking density
In the same format, the same spot, and the same depth, the higher the marking density, the slower the corresponding marking speed. The reason is that the density directly increases the marking area.
3. Marking format
Because the deflection area of the large-format marking galvanometer is enlarged, the marking speed of large-format marking is slower than that of small-format marking.
China CO2 Laser marking machine
4. Marking depth
According to demand, if you need to deepen the marking depth, you need to adjust the parameters of the fiber laser marking machine, increase the power, current and other factors of the fiber laser marking machine, so the marking speed will be affected in these processes.
Laser Marking machine supplier
5. Laser spot size
The smaller the light spot corresponds to the smaller the marking volume, therefore, the larger the light spot, the faster the marking speed.
The above are the techniques to improve the marking speed of fiber laser marking machines. I believe that if you follow these methods, you can increase the marking speed and create higher benefits.