Home > News > Industry news > In which environments should t.....

News

In which environments should the laser marking machine not operate?

The fiber laser marking machine is a high-tech mechatronics equipment. The ultra-high-precision precision marking and engraving effect makes it suitable for precision marking in many industries and has a wide range of applications. But as fine processing equipment, it may strike or not work as hard as possible in some environments.


green laser marking machine in china

1. In an environment with unstable voltage, when the fluctuation of the city voltage exceeds 5% or even exceeds 10%, the equipment may not work normally, and the stability of operation will also be reduced.
2. Too much dust in the working environment will directly affect the power of your fiber laser marking machine. The fiber laser marking machine is an optical device, and dust will block the transmission of the laser light.
3. If the ambient temperature exceeds 32 degrees Celsius for a long time, it will have an adverse effect on the operation of the equipment.
4. The ambient humidity exceeds 80%, so it is not suitable to use the fiber laser marking machine for a long time.

5. Environments such as strong electricity and strong magnetism also seriously affect the signal transmission of the laser marking machine.

6. It is not suitable for long-term use in the environment of strong acid and alkali.

7. It is also not suitable to use the equipment in the environment of two-core power supply, and three-core power supply should be used.

Solution:
Detecting voltage instability method: It is recommended to use a multimeter to directly measure the voltage to see the magnitude of the voltage difference within a period of time.
Solution for unstable voltage: It is recommended to use a better voltage regulator above 1KW.



Laser focusing lenses supplier


Solution for excessive dust in the working environment:
1. Change the working environment and establish a clean room.
2. Wipe the technical lens with alcohol and a clean cloth 1-2 times a day.

Reasons for the high temperature of the fiber laser marking machine:
1. The ventilation effect of the fiber laser marking machine itself is not good.
2. There are devices with relatively large heat generation around.
3. The indoor temperature is too high.
Solution:
1. Install a better fan on the fiber laser marking machine.
2. Change the place and keep away from the heat source.
3. Install air conditioners indoors.