Home > Products > CO2 Cutting Machine Parts > High power cutting laser sourc.....
Browse Categories
Fiber Laser Marking Machine(58)
Fiber Cutting Machine Parts(7)
Fiber Marking Machine Parts(87)
CO2 Marking Machine Parts(84)
CO2 Cutting Machine Parts(138)
UV and Green Laser Machine Parts(2)
Cutting Head for Laser Machine(2)
Laser Cleaning System(0)
Hot Sales
Contact us
CARMAN HAAS Laser Technology (Suzhou) Co., Ltd
Address: No 155, West Road Suhong, Suzhou Industrial Park, Suzhou City, Jiangsu , P.R. China
Tel: +86-512-67678768  
Fax: +86-512-67678768  
Web:www.carmanhaas.comContact Now
High power cutting laser source 3300w Raycus for fiber router machines assembling Carman HaasHigh power cutting laser source 3300w Raycus for fiber router machines assembling Carman HaasHigh power cutting laser source 3300w Raycus for fiber router machines assembling Carman Haas

High power cutting laser source 3300w Raycus for fiber router machines assembling Carman Haas

  • Place of Origin: Jiangsu, China (Mainland)
  • Brand Name: Carman Haas
  • Product name: Power supply
  • Supply Ability: 1000 Piece/Pieces per Week for power supply
  • Packing: One pieces in a 346mmx215mmx95mm carton for Reci Power Supply
  • Port: Shanghai
  • Lead Time: Shipped in 2 days after payment

Goods Description

Product profile :  P12 Intelligent Laser Power Supply

P12 Intelligent protection features : Wide volt (90V-250V) input, short circuitprotection, open circuit protection, with the input, the signal detection,temperature and humidity measurement, laser tube condition detection and faultanalysis could be showed. When the fault occurs, one shall deal with itaccording to the disturbance display on the screen and then power-off andrestart, the power supply could be used normally. P12 matches to the S2 lasertube.

Origin  :  Asia and PacificArea  China

Quality standard  :  International

Submit date  :  2014-05-23

H.S.Classification  :   Machinery &Electronics  Electr.Element  8541 Semiconductor devices;light-emitting diodes etc.; parts thereof


1. Highlights

• Wide Input Range (90v~250v): it equals to put a voltage regulator andstabilizer in power supply, which can be used under different input voltages indifferent countries or outputs stabile current under instable input voltage.

• Short Circuit Protection: when positive and negative poles short~circuits,power supply will cut off the circuit automatically for protection.

• Open Circuit Protection: when positive and negative poles open~circuits,power supply will cut off the circuit automatically for protection.

• Input Enable Signal Detection: show electrical signal from machine’s controlboard

• Temperature/Humidity Detection: self~protection starts when temperature orhumidity is over permit value to ensure the safety of laser operation

• Working Status Detection: monitor electrical signal from laser tube in timeand analyze its working status

• Malfunction analysis: analyze disorders by machines/ laser tubes and showthat information on screen in different languages

• NOTICE: Please deal with the malfunction according to the given solutionsshowing in screen firstly. Power supply can be used again only if it is poweredoff and restarted. 

2.Wiring instructions

(1)Footer 1 is 5V power supply. (Notneeded when connecting the cardinal plate. It is used when regulating the powerwith potentiometer and the 5V current should be less than 20 mA. 

(2)TH. TL refers to high and low power level respectively, and WP refers towater protection.

(3) Footer 5 G refers to ground, and 6 refers to input end.

(4)When connecting the control plate, connect the light signal with footer 2 inthe case of high power level light~emitting, (footer 3 for low power levellight~emitting), connect the ground~wire with footer 5, connect footer 6 withpower control analog signal, and make short circuit for footer 4 and 5. 

(5) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuitand 3, 5 are connected to switch), the potentiometer center is connected with 6IN, and the two other ends are connected to 5V and ground (1 and 5)respectively.

(6) PWM can also be used in footer 6, but the pulse peak is required toreach 5V, and the frequency should be above 20K. When the pulse peak signalcan't reach 5V, please rotate the current regulator button clockwise foradjustment.

(7)The high power level controls the light, 1 and 2 are connected, and 4 and 5are in water protection.

(8)It is not proposed to control laser power with high~frequency modulation,because it will have impact on the service life of the laser.

(9) The model is applicable to Z2 laser tube, it is necessary to regulateand use the current according to the laser instructions.

(10)The ammeter is concatenated to the cathode line.


Input voltage AC90V-AC250V
Input frequency 47Hz-100Hz
Max output current 32mA±1mA 
Efficiency ≥89%
Environmental working temperature :-20℃-40℃ 
storage temperature :-25℃-60℃ 
Humidity: 10%-95% non-condensing
Control interface 1.DB9 2.2EDG-5.08
Dimension L*W*H=346mm×215mm×95mm
Cooling Convection cooled


Detail Image

Packaging and Shipping

Company Information

Trade Shows

CARMAN HAAS Laser Technology (Suzhou) Co.,Ltd.


Contact Person:Kiki Qiu

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )