Home > Products > CO2 Cutting Machine Parts > Laser Cutting Machine Spare Pa.....
Browse Categories
Fiber Laser Marking Machine(10)
Fiber Cutting Machine Parts(7)
Fiber Marking Machine Parts(24)
CO2 Marking Machine Parts(12)
CO2 Cutting Machine Parts(35)
UV and Green Laser Machine Parts(2)
Cutting Head for Laser Machine(2)
Laser Cleaning System(0)
Certifications
Hot Sales
Contact us
CARMAN HAAS Laser Technology (Suzhou) Co., Ltd
Address: No 155, West Road Suhong, Suzhou Industrial Park, Suzhou City, Jiangsu , P.R. China
Tel: +86-512-67678768  
Fax: +86-512-67678768  
E-mail:sales@carmanhaas.com
Web:www.carmanhaas.comContact Now
Laser Cutting Machine Spare Parts Motor & DriverLaser Cutting Machine Spare Parts Motor & DriverLaser Cutting Machine Spare Parts Motor & DriverLaser Cutting Machine Spare Parts Motor & Driver

Laser Cutting Machine Spare Parts Motor & Driver

  • Place of Origin: Jiangsu, China (Mainland)
  • Brand Name: Carman Haas
  • Model Number: M-2-phase
  • Product name: Motor & driver
  • Application: Laser Cutting/engraving Machines
  • Laser type: CO2 Glass Laser Tube/ fiber laser
  • Wavelength: 1064nm/10.6um
  • Output current setting: SW1-SW3 three switches
  • Microstep setting: SW5-SW8 five switches
  • Automatic half current function: SW4
  • Power interfaces: DC power supply
  • Recommended operating voltage: 24VDC-50VDC
  • Driver dimensions: 118x75x32mm
  • Supply Ability: 1000 Piece/Pieces per Week for Motor &driver
  • Packing: One in a 118x75x32mm carton for motor and driver
  • Port: Shanghai
  • Lead Time: Shipped in 2 days after payment

Goods Description


It can be applied in a variety of small scale automation equipment and instruments, such as labeling machine, cutting machine, packing machine, drawing machine, engraving machine, CNC machine and so on. It always performs well when it is used in equipment which requires for low-vibration, low-noise, high-precision and high-velocity.


Driver Function Description

Driver Function Operating Instructions
Output current setting Users can set the driver output current by SW1-SW3 three switches. The setting of the specific output current, please refer to the instructions of the driver panel figure.
Microstep setting Users can set the driver Microstep by the SW5-SW8 four switches. The setting of the specific Microstep subdivision, please refer to the instructions of the driver panel figure.
Automatic half current function Users can set the driver half flow function by SW4. "OFF" indicates the quiescent current is set to half of the dynamic current, that is to say, 0.5 seconds after the cessation of the pulse, current reduce to about half automatically. "ON" indicates the quiescent current and the dynamic current are the same. User can set SW4 to "OFF", in order to reduce motor and driver heating and improve reliability.
Signal interfaces PUL+ and PUL- are the positive and negative side of control pulse signal; DIR+ and DIR- are the positive and negative side of direction signal; ENA+ and ENA- are the positive and negative side of enable signal.
Motor interfaces A+ and A- are connected to a phase winding of motor; B+ and B- are connected to another phase winding of motor. If you need to backward, one of the phase windings can be reversed.
Power interfaces It uses DC power supply. Recommended operating voltage is 24VDC-50VDC, and power consumption should be greater than 100W.
Indicator lights There are two indicator lights. Power indicator is green. When the driver power on, the green light will always be lit. Fault indicator is red, when there is over-voltage or over-current fault, the red light will always be lit; after the driver fault is cleared, if re-power the red light will be off.
Installation instructions Driver dimensions:118×75×32mm, please refer to dimensions diagram. Please leave 10CM space for heat dissipation. During installation, it should be close to the metal cabinet for heat dissipation.


Signal Interface Details

The internal interface circuits of the driver are isolated by the opt coupler signals, R in the figure is an external current limiting resistor. The connection is differential. And it has a good anti-jamming performance.


Control Signal And External Interface

Signal Amplitudes External Current Limiting Resistor R
5V Without R
12V 680Ω
24V 1.8KΩ


Common Indicator

Phenomenon Reason Solution
The red indicator is on. 1. A short circuit of motor wires. Inspect or change wires
2. The external voltage is over or low than the driver’s working voltage. Adjust the voltage to a reasonable rang
3. Unknown reason Return the goods


Packaging & Shipping


Company Information


Trade Shows


CARMAN HAAS Laser Technology (Suzhou) Co.,Ltd.

Tel:+86-18901544146

Contact Person:Kiki Qiu

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )