Quê hương > Sản phẩm > Fiber Cutting Machine components > Fiber Cutting Machine componen.....
Duyệt danh mục
Máy khắc Laser sợi quang(58)
Bộ phận máy cắt Laser sợi(7)
Marking machine components(87)
Fiber Laser Source(84)
Control card for laser marking and cutting machine(138)
Fiber Marking Machine(2)
Fiber Cutting Machine components(2)
Ống Laser CO2 và nguồn điện1(0)
Chứng chỉ
Liên hệ
CARMAN HAAS Laser công nghệ (Suzhou) Co., Ltd
Địa chỉ: Số 155, West Road Suhong, Suzhou Industrial Park, thành phố Suzhou, Jiangsu, Trung Quốc P.R.
Điện thoại: + 86-512-67678768  
Số Fax: + 86-512-67678768  
Web: www.carmanhaas.comBây giờ liên hệ
Optical fiber laser marking machine is a precision equipment, it is difficult to repair, so the following points should be paid attention to in the daily use process:
(1) equipment shall be installed in the workshop of dust, soot, corrosive gas, temperature not to exceed 10 ℃ to 35 ℃, relative humidity 45% one 85%, in order to ensure the well ventilated and maintenance needs, the machine and the distance between the walls and other obstacles to keep at least 0.6 m.
(2) when the equipment does not work, cover the lens lens and prevent dust contamination optical lenses; If the focus mirror is contaminated, remove the focus lens to clean its lower surface. Be especially careful when disassembling. Be careful not to touch, or touch the lens mirror with your hand or other object.
(3) when the device is working, the circuit is in high voltage. Any fault should be cut off immediately.
(4) to prevent the broken fiber, by optical fiber connection between laser and laser head, in use process shall ensure that fiber bending diameter greater than 300 mm, curved serious will cause fiber fracture and laser system can not work normally.
(5) the laser produced by the laser is the visible infrared light of 1.064 IXm, which can cause third-degree burns even if it is off-focus. Equipment operators must wear safety glasses when operating, visible and invisible radiation are included in the beam, even wear protective glasses look directly into the laser beam is prohibited.

Fiber Cutting Machine components

Trung Quốc nhà máy Nhà cung cấp Trung Quốc 500W sợi Laser cắt đầu

Nhà cung cấp Trung Quốc 500W sợi Laser cắt đầu

Ứng dụng: Laser tùng, thương hiệu: Carman HAASHơn
Trung Quốc nhà máy Cung cấp chất xơ cắt Laser đầu nhà sản xuất Trung Quốc

Cung cấp chất xơ cắt Laser đầu nhà sản xuất Trung Quốc

Ứng dụng: CO2 Laser phụ tùng các bộ phận chức năng: độ lệch đường quang tia Laser loại: CO2 thương hiệu: Carman HAAS nơi xuất xứ: Giang Tô, Trung Quốc (mainlan...Hơn
Quê hươngTrước1Tiếp theoCuối